Conditions of Use: |
Marine, Land Use |
---|---|
Usage: | Emergency Crew, Standby Unit, Common Units |
Output Type: | AC Single Phase |
Still deciding? Get samples of US$ 34/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
3062322 Replace Generator Engine Speed Controller Governor Control Unit EFC
Description:
The module 3062322 is a design with PID adjustment, which can give quick response to make the rotating speed stable if there is any instantaneous overload change. Matching with EFC actuators and MPU, it can control the generator controller perfectly
Technical Data:
RPM Stability: | <±0.25% |
Speed Range: | 1KHz ~ 6.5KHz |
Thermal stability: | Max ±0.7% |
IDLE Regulation: | 260 ±20Hz |
DROOP Regulation: | Minimum:15Hz ±6Hz/ 1 Amp |
Maximum:400Hz ±75Hz/ 1 Amp | |
External Speed Regulation: | ±200Hz (with 1 KΩ connected) |
AUX Input Sensitivity: | 148Hz / 1V., ±10Hz |
Impedance: | 1MΩ |
Working Temp Range: | -40 ~ 85 |
ENVIRONMENT | |
Working Humidity Range: | Maximum 95% |
Stocking Temp: | -55 ~ 92 |
Shocking: | 20-100HZ 500mm/Sec. |
INPUT POWER SUPPLY | |
Voltage: | 24V |
Grounding Pole: | Negative pole |
Power Supply: | 40mA |
Actuator Continuous Current: | Minimum 1A, Maximum 4.5A |
MPU | |
Signal: | 2 ~ 120V RMS |
NOTE: Above-Mentioned parameters are tested with a 3800Hz working frequency
this product is made in china, no doubt about the quality. Choose us , we won't let you regret about it.