Kutai Generator Ea16A Ea16 50/60Hz 3 Phase AC Regulator AVR for Diesel Generator

• Conditions of Use: Land Use
• Usage: Emergency Crew, Standby Unit
• Output Type: AC Three Phase
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: EA16A
• Cooling Method: Air Cooled
• Installation Method: Portable
• Generator Type: Diesel Generator
• Warranty: 1 Year
• Language: Multiple Language
• Installation Metho: Portable
• Weight: 0.5kg
• Transport Package: Carton
• Specification: 12.5*8.5*5.5CM
• Trademark: New
• Origin: Made in China
• HS Code: 9032899090
• Production Capacity: 100000 Piece/ Year
• Package Size: 12.50cm * 8.50cm * 5.50cm
• Package Gross Weight: 0.500kg

Product Description

Kutai Generator Ea16A Ea16 50/60Hz 3 Phase AC Automatic Voltage Regulator AVR for diesel generator

Discription:

The EA16 AVR is an update of the EA15A AVR. It is similar to the original EA15A in power and voltage sensing capabilities but with new enhanced paralleling functions; the user can now select the CT inputs either 1 & 5 Amp or use new A1 & A2 analogue signal inputs terminals for use with PLC paralleling controls. It has new over-voltage excitation safety circuits to prevent damage caused by the accidental detachment of the sensing wires or irregularities on the generator's excitation circuits.

EA16 Specifications
Sensing Input	Voltage 170~510 VAC single phase 2 wire
	Frequency 50/60 Hz *EA16-400Hz : Frequency 400 Hz
Power Input	Voltage 60~300 VAC single phase 2 wire
Output	Voltage Max. 90 VDC @ 240 VAC input Current Continuous 16A, Max. Intermittent 20A for 10 sec. Resistance Min. 6 Ohm @ 35 VDC
Voltage Regulation	< ±0.5% (with 4% engine governing)
Voltage Build-up	Residual volts at AVR terminal > 5 VAC
External Volts Adjustment	±5% with 2 K Ohm 1 watt trimmer
Unit Power Dissipation	Max. 10 watt
Thermal Drift	0.03% per °C change in AVR ambient
Under Frequency Protection	55 Hz @ 60 Hz / 45 Hz @ 55 Hz (Adjustable) *EA16-400Hz : 360 Hz (Adjustable)
CT Current Compensation Input	1A or 5A (Selectable)
Analogue Input	±5 VDC ±10% AC @ ±3 VDC
Environment	Operating Temperature : -40~70 °C Storage Temperature : -40~85 °C Relative Humidity : Maximum 95% Vibration : 3.3G @ 100~2 KHz
AVR Controls Functions	VOLT : Voltage Adjustment STAB : Stability Adjustment U/F*: To Set the U/F Knee Point DROOP : To Adjust Droop TRIM : Analogue Input Adjustment (*U/F: Under Frequency Protection)
Dimensions	156.0 (L) x 106.0 (W) x 43.0 (H) mm
Weight	450g ±2%

Attention:

1. AVR can be mounted directly on the engine, genset, switchgear, control panel, or any position that will not affects operation. For dimension reference, please see Figure 1. 2. All voltage readings are to be taken with an average-reading voltmeter Meggers and high-potential test equipment must not be used. Use of such equipment could damage the AVR. 3. Secure all wiring connection. Do not install AVR at a place with high vibrations to prevent loose connections. For safety do not touch the heat sink while in operation. 4. Fuse specification : 16A / 250V slow blow type. 5. Terminal:"Fast-On" terminals 6.35mm (1/4 inch) & With 4mm crimping terminal.